Sofec
Expert'Liss in 25 kg Bucket
Ready-to-use filler plaster for walls and ceilings, suitable for manual or airless application. Optimal slip and long working time for flawless results with minimal effort.
32,06 €
24-48hMy cart
Your cart is empty.
SEMINRef. EPM LISSAGE FIN Poussière maitrisée-10kg
EPM LISSAGE FIN Dust Control
Ready-to-use smoothing compound for levelling interior walls and ceilings in plaster or concrete. Controlled dust formula for healthier sanding and a cleaner worksite.
In stock
34,19 €incl. VAT
SizeChoose your format
Poids
Add to cart
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
3× ou 4× sans fraisdès 8,55 €/mois
Estimated delivery: 24-48h
Technical sheetDownload PDFFree shippingFrom €149 ex. VAT in BE · 24-48h
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
EPM LISSAGE FIN Poussière maitrisée
EPM Lissage Fin Poussière maîtrisée is a ready-to-use interior smoothing compound that stands out for its reduced sanding, generating significantly less dust than a traditional compound. Ideal for levelling and smoothing wall and ceiling surfaces before decorative work, it delivers perfectly smooth substrates whilst improving worksite comfort thanks to its innovative formulation that limits airborne particles.
Technical characteristics
- Ready-to-use interior smoothing compound, applicable directly without preparation
- Special formulation significantly reducing dust during sanding
- Compatible with plasterboard, plaster blocks, concrete, cement render and autoclaved aerated concrete
- Application possible with spatula, roller or machine
- Finishing with scraper or trowel for optimal results
- Suitable for finishing coat on joint tapes
- Available pack sizes: 10 kg and 25 kg
Application advice
Before application, ensure the substrate is clean, dry, sound and dust-free. Highly absorbent substrates must be pre-treated with a suitable primer to guarantee optimal adhesion and prevent the compound from drying too quickly.
Application is carried out with a spatula for small surfaces or a roller for large areas. For major projects, using a rendering machine saves considerable time. Apply a thin, even coat, then smooth immediately with a stainless steel scraper or trowel using crossed passes to eliminate marks.
Sanding is carried out once the compound is completely dry. Use fine abrasive (120 to 180 grit) and notice the significant dust reduction compared to a conventional compound. This characteristic facilitates worksite cleaning and improves working conditions, particularly valuable when renovating occupied spaces.
Technical specifications
| Use | Surface finishing and joint tape finishing |
| Type | Ready-to-use fine finishing plaster |
| Finish | Trowel or finishing blade |
| Packaging | 10 kg, 25 kg |
| Substrates | Plasterboard, plaster blocks, concrete, cement plaster, aircrete |
| Application | Interior only |
| Main advantage | Sanding with controlled dust generation |
| Application tools | Spatula, roller or mechanical spreader |
Pro tips
The main advantage of this compound lies in its ability to limit dust during sanding, but be careful not to neglect the initial smoothing phase. Many applicators tend to rely on sanding to correct defects, which cancels out the "controlled dust" benefit. Work on your stainless steel scraper technique in an almost horizontal position, with crossed passes and constant pressure: the more careful your smoothing, the less you'll need to sand.
For large surfaces, favour roller application followed by immediate smoothing with a trowel. Slightly dampen your trowel during the final passes to perfect the surface finish. On joint tapes, wait until the compound begins to set before final smoothing: this avoids tearing and achieves an invisible finish without excessive sanding. When renovating an occupied property, this compound becomes a real commercial asset thanks to the worksite cleanliness it maintains.
FAQ
Can EPM Fine Finishing be applied directly onto new plasterboard?
Yes, EPM Fine Finishing can be applied directly to plasterboard and plaster blocks. Simply ensure that the surface is clean, dry and dust-free. On highly absorbent substrates, apply a primer beforehand to guarantee optimal adhesion and prevent overly rapid drying.
How long should I wait before sanding?
Drying time varies depending on thickness applied, temperature and ambient humidity. Under normal conditions, complete drying typically takes several hours. Verify that the filler is completely dry to the touch and shows a uniform colour before sanding. Premature sanding may cause damage.
What is the difference compared to standard finishing plaster?
The main difference lies in the formulation, which generates significantly less dust during sanding. This characteristic improves working comfort, simplifies site cleaning and makes the product particularly suitable for renovations in occupied spaces. Application is similar to traditional plaster, but the working atmosphere is considerably healthier.
Can it be applied by machine on large surfaces?
Yes, EPM Fine Finishing is compatible with mechanical application, making it perfectly suited for large-scale projects. This method delivers considerable time savings whilst maintaining finishing quality. Follow up with a trowel or finishing blade for a perfectly flat surface.
What surfaces can it be used on?
EPM Fine Finishing can be applied to a wide range of interior surfaces: plasterboard, plaster blocks, concrete, cement plaster and aircrete. The substrate must always be clean, dry, sound and free of loose material. For highly porous or uneven substrates, application of an appropriate primer is recommended.
