L'outil Parfait

Peelable liner for eco-concept tray: paints, fillers, adhesives or plaster with no cleaning. Use, peel, dispose, available in 7L and 14L.

Complete 8-piece kit for smoothing and jointing plasterboard tape: Alu-choc blades and knives, pole included for fast, even work without wrist fatigue.

Easily scrape off paint or adhesive residue from your windows with this lightweight, robust tool that's easy to handle in any situation.

High-density polyester roller for applying all lacquers on smooth surfaces. Streak-free finish with no fibre loss, optimal coverage.

180 mm roller sleeve for rough facades: 18 mm fibre to fill irregularities, bevelled edges prevent streaks. Compatible with all exterior paints, uniform finish guaranteed.

24 mm twisted polyamide roller sleeve for rough façades: fills irregular reliefs in a single thick pass and covers perfectly thanks to its high absorption.

Micro-facade roller Ø30 mm for irregular surfaces and difficult access. 18 mm polyamide sleeve, 29 cm pole-mountable frame, ideal for pliolites and thin coatings.

Attach your rollers, brushes, knives and scrapers to a telescopic pole to paint ceilings and high walls without a ladder. Change tools with one click.

Dual-material clip-on frame for 110 and 150 mm sleeves. One-motion sleeve change, without screws or tools, to move from job to job without wasting time.

Airtight tube to store your roller or sleeve between coats without cleaning. Resume work immediately with no drying or paint waste.

180 mm metal grid for wringing out your rollers directly on bucket or tray. Removes excess paint and ensures smooth application without drips.

Refill for ParfaitBac, the large-width flat tray on wheels compatible with 500 mm rollers. Replaces your worn grid to extend the lifespan of your professional tray.

Mobile tray for rollers up to 50 cm with disposable eco-refills. No more cleaning: fold and dispose after use, saving time on site.

Removes air bubbles from epoxy resins, floor paints and self-levelling compounds for a smooth finish without cracking. 11 mm plastic spikes that protect the surface during…

12 mm microfibre roller for water-based paints on smooth walls and ceilings. Consistent stippled finish thanks to high density and bevelled edges that prevent lap marks.

Complete kit for fitting and jointing plasterboard: 5 spatulas with curved blades (6 to 15 cm) that facilitate application in joints and corners. Tempered stainless steel blades…

Removes paint and varnish from wood or metal with 2 temperature settings (350°C/600°C). Supplied with nozzle, also ideal for drying render or defrosting pipes.

Complete kit for smoothing walls and ceilings: spatulas, trowel and plastering knife all together in a practical carry case. Taut finishes ready to paint on plaster, concrete and…

Galvanised S-hook 160 mm for suspending and securing your tools and materials in the truck. Robust steel that resists repeated loading on side rails and bars.

Complete kit for smoothing façades, heavy renders and cast concrete. Bi-Flex anti-mark blades + high-retention roller + lightweight poles: consistent finish, professional pace,…

Tightens and smooths joint tape on plasterboard in a single pass thanks to its dual stainless steel blade. Prevents wrist fatigue and guarantees uniform adhesion without manual…

Apply and smooth your fillers with the roller on large surfaces in a single pass. Application time divided by 3, homogeneous finish without excessive sanding.

Protects doors, windows and skirting boards in one move: satin 40 g anti-splash paper + premium masking tape. Unroll, stick, work with peace of mind.

Complete kit for applying and smoothing filler with roller: consistent thickness, perfect flatness and minimal sanding. 6 blades + 2 anti-spatter rollers.

Robust job site trolley for transporting your tools and materials on site. Saves time and facilitates movement thanks to its manoeuvrability.

Cut your skirting boards, mouldings and wooden frames at precise angles using integrated cutting guides. Beech wood construction with screw and glue assembly that resists heavy…

Masks smooth and slightly rough surfaces without leaving traces on removal. Solvent-resistant and hand-cuttable for quick, clean work.

Mix your liquid paints and clean your roller sleeves directly on your drill. Partial sleeve attachment for quick, effortless cleaning.

Mix your plaster in small quantities without sticking to the walls thanks to its rubber material. Cleans easily with a simple flex of the bowl.

Sprays release oils, water repellents, anti-moss treatments and wood treatments with precision. Viton seals to resist aggressive products, translucent 6L tank and 3 bar pressure.

Stainless steel joint tray for putty knives up to 30 cm: less frequent refilling, scraped edges for removing and collecting compound. Flared base and non-slip grip for gypsum…

Removes paint, adhesive and dirt from windows and tiles in a single pass. Retractable and lockable blade, pocket-sized for always having it on hand.

Removes paint, glue and stickers from glass without scratching. Pack of 5 aluminium blades compatible with glass scraper ref. 835000.

Double tooth design for cutting plasterboard and panels: fine teeth at the tip for straight cutting, coarse teeth for fast sawing. Bi-component handle with integrated 90° and 45°…

Precise cutting of masking films, joints and paper tape thanks to its replaceable 18 mm blade. Anti-retraction lock for safety on site.

Scrape, strip, fill and clean with a single tool. Hardened stainless steel blade and reinforced aluminium end for striking without damaging the handle.

Telescopic 2-section aluminium pole for ErgoLiss, ClipSystem and OP Process rollers. Quick cam lock, ergonomic non-slip grip, dust extraction compatible.

Quickly mixes fillers, sealants and paste products without lumps. Direct drill attachment for on-site time savings.

Protect your knees whilst maintaining full mobility on site. 3 swivel wheels and gel cushion to reduce back fatigue and RSI during ground-level work.

Mix your paints in buckets or pots by hand, effortlessly. Solid polypropylene construction, lightweight and easy to clean after use.

Galvanised steel grid that attaches to paint buckets and paint trucks to wring out your rollers without splashing. 0.8 mm thickness for optimal rigidity in daily use.

Paint corners and hard-to-reach areas effortlessly with this specialised roller. Disposable: neat finish without spending time on cleaning.

Clean and fast cutting of cork, PVC, carpet tiles and rubber up to 635 mm. Telescopic lever for effortless work, rigid frame for consistent precision.

Clean and quiet cutting of LVT, PVC and cork up to 330 mm wide and 16 mm thick. Telescopic handle for increased cutting force, dust-free and silent operation.

Complete screw-fixed tools for plastering plasterboard in 3 coats: rolling, smoothing and finishing. Modular poles, trace-free finish, reduces fatigue.

Dual-material clip frame for 180 mm paint roller, suitable for ceilings and high walls. Quick-coupling system and ergonomic handle that reduces fatigue on large projects.

Angled brush ideal for painting radiators, pipes and difficult-to-reach corners with acrylic paint. Its taut synthetic fibres guarantee a smooth finish without streaks.

Cutting-in brush specially designed for acrylic paint on corners, mouldings and flat surfaces. High-resilience synthetic bristles guarantee clean, precise edges without streaks.