VALISE PARFAITLISS'® PLAQUISTE

The ParfaitLiss'® Plasterer's Case brings together in a single kit all the tools needed for smoothing and jointing plasterboard tape, from fine filling to large surfaces worked with a pole. Designed for professional plasterers as well as DIYers who want a clean result without excessive re-sanding, it combines flexible blades, Alu-choc® knives and a telescopic pole in a single modular concept.

Technical specifications

• Complete 8-piece kit
• 4 ParfaitLiss'® blades in widths of 25, 35, 45 and 60 cm
• ParfaitLiss'® blade in hardened stainless steel, 0.3 mm thick, progressive rounded edges to prevent marks
• 1 OP Process'® pole made of 2 sections of 0.50 m with ultra-light aluminium tube
• 1 ParfaitLiss'® connector to fit the blades onto the pole
• 2 Alu-choc® plasterer's knives of 10 and 15 cm, including one model with a screwdriver tip
• Alu-choc® knives in hardened stainless steel, glossy polished finish, through-going aluminium tip allowing striking
• Storage case measuring 83.5 x 33 x 9.5 cm

Application tips

Before smoothing, make sure the joint tape is properly bonded and that the first coat of filler has cured sufficiently to avoid any tearing when passing the blade. A clean, dust-free surface with no sharp edges greatly facilitates the work of the ParfaitLiss'® blade and limits touch-ups.

For long joints or ceilings, fit the desired blade onto the OP Process'® pole using the ParfaitLiss'® connector: the Bi-Flex technology with PVC counter-blade ensures even smoothing across the full width, even when working at arm's length. On corners and coving, use the Alu-choc® knives, whose curved blade and 90° edges make it easier to apply filler while it's still wet, while keeping edges crisp.

Between passes, wipe the blade to prevent filler from drying on the edge and affecting the glossy polished finish, which naturally reduces product build-up. Always put the clip-on protector back on the ParfaitLiss'® blades after use to preserve their flatness and sharpness over time.