Parafoam Panelglue NBS
Gun-applied PU foam for bonding insulation panels (ETICS, flat roofs, interior walls) and aerated concrete blocks. Also used for sealing and filling joints, cracks and holes.
This selection brings together sealants, mounting adhesives and polyurethane foams for finishing and installation work. You'll find paintable acrylic sealants, sanitary silicones, adhesives for fixing mouldings and skirting boards, expanding foams for draught-proofing, plus the guns and smoothing agent that go with them. Painters, plasterers and joiners rely on them every day on site, and DIY renovators will find everything they need for flawless joints. These products can be applied to most common materials: wood, concrete, brick, stone, plaster, tiles, aluminium or PVC. Start by choosing according to the finish. For a joint that will be painted, such as a fine crack, a gap between skirting board and wall or a cornice joint, go for an acrylic sealant. The decorative version is ideal for neat interior finishes and can be painted wet-on-wet. For a window frame or façade, choose the exterior version. In wet areas (shower, bath, worktop), opt for a sanitary silicone, which generally cannot be painted, and smooth it with the finishing agent for a clean joint. To fix a moulding or skirting board, use a mounting adhesive. To insulate around a window frame, use a polyurethane foam with the gun designed for its canister.
Gun-applied PU foam for bonding insulation panels (ETICS, flat roofs, interior walls) and aerated concrete blocks. Also used for sealing and filling joints, cracks and holes.
Aluminium manual gun for 310 ml sealant cartridges. Integrated anti-drip system prevents runs and reduces waste on your job sites.
Seals joints on doors, windows and skirting boards with movements up to 12.5%. Easy application, paintable after drying, odour-free.
Smooth your sealant joints effortlessly without dilution: pH-neutral formula, solvent-free, no staining and safe for all common substrates.
Bonds and fixes wood, metal, PVC or stone to dry or damp surfaces, even outdoors. Rapid initial strength, high resistance, paintable, shrink-free.
Apply single-component PU foam with precise dosing via the adjustment screw. The PTFE adapter prevents foam from sticking after use.
Sprayable PU foam for joints, insulation and bonding of light panels. Low expansion pressure: zero deformation, precise dosage, perfect finish.
Sprayable PU foam with low expansion for joints, sealing and insulation on wood, concrete and metal. Precise dosing with NBS gun, easy to cut and paint.
Neutral oxime silicone for sanitary joints, bathrooms and cold rooms. Adheres without primer to plastics and building materials, resistant to mould.
310 ml caulking gun with dual power system: precise application of sealants, adhesives and silicones with 50% less effort thanks to the reinforced lever.
Neutral 4-in-1 silicone for facades, glazing, sanitary and natural stone. Permanent elasticity, UV and mould resistant, available in 40+ colours.
MS polymer adhesive with immediate tack for fixing heavy loads without temporary support. Adheres to damp surfaces, compatible with natural stone and paints.
Acrylic sealant for joints around window frames, skirting boards and door frames. Paintable directly after drying, odourless and solvent-free.
Seal exterior joinery and cracks even in rain. Ready to paint in 30 minutes, long-lasting plasto-elastic performance.
Acrylic sealant for fine joints and small cracks, ready to paint immediately without cracking. Preserves the matt finish of your paint.