Heat Gun

The heat gun is the essential tool for effectively removing paint and varnish using heat. With adjustable power from 1000 W to 2000 W and temperatures reaching 350°C or 600°C, it adapts to all your paint stripping work, as well as drying render, shrinking cables and defrosting water pipes. Supplied with a stripping nozzle, this versatile tool meets the demands of both professionals and homeowners.

Technical specifications

• Adjustable power: 1000 W to 2000 W to adapt intensity according to surface
• Dual temperature control: 350°C or 600°C depending on work type
• Air flow at 2 settings: 240 l/min or 450 l/min
• Supply voltage: 230 V
• Supplied with 1 stripping nozzle
• Multiple applications: paint and varnish removal, render drying, cable shrinking, pipe defrosting

Application advice

When stripping paint, start at the low temperature setting (350°C) and increase if necessary. Work in steady movements a few centimetres from the surface, avoiding concentrating heat too long in one spot. Scrape away the softened paint gradually using a paint scraper or suitable spatula.

Always switch off the tool before setting it down and allow the nozzle to cool before handling. Heat can spread to combustible materials outside your field of vision: never use the heat gun in damp conditions, in the presence of flammable gases or near combustible materials. Never leave the device unattended while powered on.

For drying render or defrosting, favour high air flow with moderate temperature to avoid damaging surfaces. The nozzle can reach very high temperatures: handle the tool carefully to avoid any risk of accidental fire.