ULTRAGRIME PRO: POWER SCRUB
XXL dual-sided textured wipes that remove grease, fresh paint and silicone from all surfaces. Stay moist for several days and resist intensive work on site.
Matt 2-in-1 paint for interior walls and ceilings: primer and finish in one coat. Enhanced adhesion, wet-on-wet application without brush marks.
Estimated delivery: 24-48h
Technical sheetDownload PDFEvolukyd Matt White Sofec is a 2-in-1 paint combining primer and finish in a single application. Formulated with an emulsion alkyd resin supplemented with 31.5 % bio-based content, it offers excellent application comfort and outstanding adhesion on all dry interior substrates. The formulation enables wet-on-wet application, ideal for projects where time is critical.
Apply Evolukyd Matt to clean, dry and sound surfaces using a high-density microfibre polyester woven roller 12 mm or polyester woven 13 mm. Application temperature must exceed 8°C and relative humidity below 70 %. Never apply over overheated or damp substrates.
The 2-in-1 formulation enables wet-on-wet application once the first coat is matt. For recoating after complete drying, allow minimum 6 hours. Clean tools immediately after use with water. Store containers away from frost and heat.
| VOC | < 1 g/L |
| Type | 2-in-1 primer and topcoat paint |
| Resin | Bio-sourced alkyd emulsion 31.5 % |
| Finish | Matt (gloss < 2 % at 85°) |
| Coverage | 9 to 11 m²/L depending on substrate |
| Touch-dry | 1 to 2 hours at 23°C and 50% RH |
| Recoatable | Wet-on-wet once matt |
| Shelf life | 18 months (unopened packaging) |
| Application | Roller, brush, airless (517 nozzle) |
| Dry extract | 56 % |
| Washability | Class 2 (NF EN 13300) |
| Overcoatable | 6 hours |
| Application temperature | Minimum 8°C |
To optimise your project with Evolukyd Mat, take advantage of its wet-on-wet capability: as soon as the first coat is matt, you can apply the second without waiting for full drying. This saves you precious time on large surfaces. Be sure to mix the product thoroughly before application and respect minimum temperatures, especially in winter in unheated buildings. For ceilings, prefer a high-density roller that will limit splashing while ensuring good opacity on the first pass.
Yes, Evolukyd Mat is a 2-in-1 paint that serves as both primer and topcoat. It can be applied directly to dry, sound and cohesive plasterboard without a prior undercoat.
Thanks to its good opacity, two coats are generally sufficient to achieve an even finish. Wet-on-wet application allows you to recoat as soon as the first coat is matt, which accelerates the work schedule.
Evolukyd Mat keeps for 18 months in its original unopened packaging, provided it is stored away from frost and heat.
Yes, Evolukyd Mat has wet-abrasion resistance of class 2 according to standard NF EN 13300, which allows regular cleaning of painted surfaces.
With a VOC content below 1 g/L and low odour, Evolukyd Mat is perfectly suited to sensitive spaces such as bedrooms, nurseries or offices, where indoor air quality is a priority.
XXL dual-sided textured wipes that remove grease, fresh paint and silicone from all surfaces. Stay moist for several days and resist intensive work on site.
XXL+ wipes (38x25 cm) that degrease, clean and protect in a single action: remove paint, silicone, PU foam and adhesives on all surfaces.
7L bucket with grid and 5 peelable films: change colour in 5 seconds, zero cleaning, zero drain discharge.
14L bucket with 5 disposable refills for rollers: change liner in 5 seconds between colours, no water cleaning. Fewer pollutant discharges, less thinner.