SPS
EASYTOP EXTRA MAT BLANC
Extra-matt wall paint for walls and ceilings, easy to apply without leaving marks. Delivers a smooth, uniform finish for a neat result.
79,06 €
24-48hMy cart
Your cart is empty.
SPS
Facade Mat à teinter
Tintable matt acrylic paint for facades and interior walls, including damp rooms. It withstands weather and abrasion for a long-lasting finish.
In stock
24,16 €incl. VAT
SizeChoose your format
Packaging
Your colour
Add to cart
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
Estimated delivery: 24-48h
Free shippingFrom €69 ex. VAT in BE · 24-48h
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
Facade Mat à teinter
SPS Facade Mat is a 100% acrylic matt wall paint designed for facades exposed to the Belgian climate, as well as for interior walls, including damp rooms. It delivers a durable, uniform, ultra-matt finish with good resistance to weather and abrasion. It is available in a tintable version, in 1 L, 4 L and 10 L tins.
Technical characteristics
- Type: 100% acrylic, water-based paint for interior and exterior use.
- Finish: matt, with a gloss level of 2% at 85°, i.e. an extra-matt finish.
- Abrasion resistance: class 1 according to the DIN EN 13300 standard.
- Theoretical coverage: approximately 9 m² per litre per coat. Actual coverage depends on the substrate and the application method.
- Drying at 20 °C / 50% RH: touch-dry after 2 hours, recoatable after 4 to 6 hours.
- Volume solids: 42%, with a density of 1.44 g/cm³.
- Recommended film thickness: approximately 111 µm wet, i.e. approximately 46 µm dry.
- Behaviour: water-vapour permeable, with good flow for a smooth result.
Application tips
A good finish depends first and foremost on the substrate. It must be clean, sound, dry and cohesive. Remove any crumbling areas, moss, algae and old paint that no longer adheres, then repair cracks and defects before painting. On concrete, stone and masonry, check the condition of the substrate before painting. For specific cases (highly absorbent substrate, existing paint system), the manufacturer advises contacting them.
Stir the product thoroughly before use. For a tintable version, use the same colour reference and the same batch for a single facade to avoid differences in shade. Apply in even coats without overloading, respecting the recommended film thickness. Observe the recoating time of 4 to 6 hours between coats, under conditions of 20 °C and 50% relative humidity.
Choose a brush or roller suited to the texture of the substrate. On a facade, work in complete sections, keeping a wet edge to avoid visible lap marks. Avoid days with forecast rain or full sun, which disrupt drying and the final appearance.
Technical specifications
| Type | Peinture acrylique 100 %, à base d'eau |
| Usage | Intérieur et extérieur, pièces humides |
| Support | Béton, pierre, maçonnerie |
| Finition | Mat (2 % à 85°, extra mat) |
| Rendement | Environ 9 m²/L par couche (théorique) |
| Conditionnements | 1 L, 4 L, 10 L |
| Temps de séchage | Sec au toucher : 2 h, recouvrable : 4 à 6 h (20 °C / 50 % HR) |
| Extrait sec en volume | 42 % |
| Résistance au frottement | Classe 1 (DIN EN 13300) |
Pro tips
On a facade, the classic pitfall is painting a wall in several stages, with stops in the middle of a section. With an extra-matt paint like Facade Mat, touch-up marks show up in raking light. Always stop your work at a corner, a downpipe or an expansion joint, and prepare enough paint to finish a complete section. For a tinted colour, mix all the tins you need in a single large container (the "boxing" technique).
Calculate your quantities using the theoretical coverage of 9 m²/L, but keep a margin. A rough or highly absorbent substrate uses more paint, and a spare 1 L tin is handy for touch-ups. For a good-sized facade, the 10 L size is more practical and limits shade differences between tins.
FAQ
Facade Mat convient-elle à l'intérieur comme à l'extérieur ?
Oui. Cette peinture acrylique mate est prévue pour les façades extérieures et pour les murs intérieurs. Elle convient aussi aux pièces humides.
Quel est le rendement de Facade Mat ?
Le rendement théorique est d'environ 9 m² par litre et par couche. Un pot de 10 L couvre donc environ 90 m² par couche en théorie. Le rendement réel varie selon la nature, la structure et l'absorption du support, ainsi que selon la méthode d'application.
Combien de temps faut-il attendre entre deux couches ?
À 20 °C et 50 % d'humidité relative, la peinture est sèche au toucher après 2 heures et recouvrable après 4 à 6 heures. Une température plus basse ou un air plus humide allongent ces délais.
Sur quels supports peut-on l'utiliser ?
Elle s'utilise notamment sur béton, pierre et maçonnerie. Le support doit être propre, sain et cohésif. Pour un support particulier ou un ancien système de peinture, demandez conseil à votre distributeur ou au fabricant.
Quelle est la durabilité de Facade Mat en façade ?
Un distributeur indique une durabilité extérieure de 6 à 8 ans. Cette durée reste indicative, car elle dépend de l'exposition, de l'état du support et de la qualité de la préparation.
