Heavy-Duty Cleaning Sponge
Robust sponge for removing fresh paint residue from tiles, floors and work surfaces. Resistant cellular structure that absorbs effectively without breaking down.
Disinfects and bleaches all surfaces: floors, sanitaryware, textiles. Concentrated formula at 15° for deep cleaning and perfect hygiene.
Estimated delivery: 24-48h
Forever bleach 15° is a sodium hypochlorite solution with 15% active chlorine, designed to effectively disinfect, bleach and deodorise all surfaces on your worksite or at home. Versatile and powerful, it removes stubborn stains and guarantees spotless cleanliness when used correctly and with necessary precautions.
This bleach must be diluted before use. For cleaning and disinfecting standard surfaces (floors, sanitaryware, professional premises), dilute according to your specific needs. For bleaching textiles or fibres, follow appropriate dosage rates. Bleach 15° can also be used for cleaning and bleaching façades when properly diluted.
Handle this product with care: wear protective gloves and ensure adequate ventilation of work areas during use. Never mix bleach with other chemical products, particularly acids, descalers or ammonia, as this generates dangerous toxic fumes. After application to surfaces that may come into contact with food, rinse thoroughly with clean water.
Store the product in its original packaging, protected from light and heat, to preserve its disinfectant effectiveness. Bleach is a corrosive product: avoid all contact with skin, eyes and mucous membranes.
| Brand | Forever |
| Odour | Characteristic chlorine |
| Density | Approximately 1.21 g/cm³ |
| Packaging | 5 litres |
| Appearance | Colourless to yellowish liquid |
| Concentration | 15 degrees chlorometric |
| Classification | Corrosive product |
| Freezing point | -5°C |
For painting contractors, bleach 15° is a valuable asset when preparing job sites. Use it diluted to treat mouldy surfaces or those showing traces of mould before applying damp-proofing treatment or special moisture-resistant paint. Allow adequate working time, then rinse and let dry completely before applying any coating. Caution: bleach is corrosive and discolours textiles. Always protect sensitive areas on site and ventilate thoroughly during and after work. In case of skin or eye contact, rinse immediately with plenty of water and consult a doctor if necessary.
No, bleach 15° must always be diluted according to the intended use. Undiluted, it is too corrosive and may damage certain surfaces, discolour materials and pose health risks. Always follow recommended dilution ratios and test on an inconspicuous area before general application.
Yes, diluted bleach can treat surfaces with superficial mould. It disinfects and sanitises the substrate. However, it does not address the underlying moisture issue. After treatment, rinse thoroughly, allow to dry completely and apply a specific anti-mould product before repainting for lasting results.
Always wear gloves and safety glasses. Work in a well-ventilated area to avoid inhaling chlorine vapours. Never mix bleach with other chemicals, especially acids, limescale removers or ammonia, as this generates dangerous toxic fumes. Store the product out of reach of children, in its original packaging, away from heat.
Bleach degrades naturally over time and when exposed to light. Store it in the closed original container, away from light and heat, at a temperature below 40°C to preserve its disinfecting properties. Once opened, use within a reasonable timeframe to ensure optimum effectiveness.
Diluted bleach can be used to disinfect and lighten certain woods, but with care. It may alter the wood's natural colour and damage fibres if too concentrated. After treatment, rinse thoroughly and neutralise if necessary. Let dry completely before sanding and applying paint or finish.