BETON HAFTGRUND

Semin's BETON HAFTGRUND is a ready-to-use, solvent-free bonding primer, specially formulated for smooth or low-porosity substrates both indoors and outdoors. Its granular pink texture creates an adhesion bridge between difficult surfaces and cement- or plaster-based coatings, whilst regulating the porosity of heterogeneous substrates.

Technical features

• Ready-to-use primer without solvent, with visible grains and easily identifiable pink colour
• Composition based on emulsion resin, sand, mineral fillers and additives
• Consistency similar to paint for easy application
• Suitable for interior and exterior walls as well as ceilings
• Specially designed for smooth formwork concrete and self-compacting concrete
• Average consumption of 300 g/m²
• Drying time of approximately 6 hours depending on substrate

Application advice

Before application, carefully prepare your substrate by removing all irregularities, dusting off and ensuring it is clean and dry. Apply BETON HAFTGRUND generously with a brush or roller, ensuring a uniform coat over the entire surface.

The product must be stored in its original unopened packaging, protected from frost and heat. Allow a drying time of approximately 6 hours before applying your finish coat, although this may vary depending on the nature of the substrate and ambient conditions.

For heterogeneous substrates with multiple materials of different types, BETON HAFTGRUND effectively regulates porosity and ensures uniform adhesion of your final coating.