TOUPRET LE REBOUCHEUR
Fills holes and cracks in plaster, wood, concrete or cement. Fast drying and easy application for a smooth, durable finish.
Smoothes sprayed finishes and finishes joint tape and plasterboard without marks thanks to Bi-Flex technology. High speed on large surfaces, minimal sanding required.
Estimated delivery: 24-48h
The ParfaitLiss smoothing blade is the reference tool for smoothing sprayed finishes, finishing joint tape and plasterboard without marks, as well as applying decorative finishes. Designed for very high-speed work on large surfaces, it minimises material loss and significantly reduces subsequent sanding work.
For optimal finishing, work in cross passes whilst maintaining a constant angle to the substrate. Bi-Flex technology ensures uniform pressure distribution across the full blade length, guaranteeing consistent results even on large widths. The progressively rounded edges prevent overlap marks, which is particularly valuable when finishing joint tapes.
For large surfaces, opt for larger widths (80 cm, 100 cm or 120 cm) which allow rapid coverage whilst maintaining excellent control. Pole use is recommended for ceilings and high areas to avoid uncomfortable postures. Clean the blade regularly during application to maintain optimal glide.
After use, thoroughly clean the blade with clean water and always replace the protective clip to preserve sharpness and flatness. Flat storage in a dry location will significantly extend the life of your tool.
| Use | Manual or with telescopic pole |
| Edges | Progressive rounded mark-free edges |
| Guard | Reusable clip-on provided |
| Material | Tempered stainless steel |
| Technology | Bi-Flex with PVC counter-blade |
| Manufacture | France – L'Outil Parfait |
| Applications | Sprayed render, polished concrete |
| Blade thickness | 0.3 mm |
| Available widths | From 2 to 120 cm (13 formats) |
Bi-Flex technology makes all the difference on large surfaces: the PVC counter-blade absorbs substrate irregularities while the stainless steel blade maintains constant contact, preventing thick spots and voids. For sprayed render, work at the right time of set: not too early (render sticks to the blade), not too late (excessive resistance). A well-executed pass with the ParfaitLiss smoothing blade significantly reduces sanding, saving considerable time on renovation and new-build projects. Keep several widths in your vehicle: mid-range formats (25-35 cm) are the most versatile for daily use.
For versatile use, choose formats between 25 and 35 cm, which offer a good compromise between manoeuvrability and performance. Beginners will appreciate their light weight and ease of control. Very large widths (80-120 cm) require experience and are reserved for professionals working regularly on large surfaces.
Yes, all ParfaitLiss blades are compatible with the ParfaitLiss OP Process telescopic pole (sold separately). This pole allows you to work at ground or ceiling level without scaffolding, maintaining ergonomic posture and significantly increasing productivity on large surfaces.
Clean the blade immediately after each use with clean water to prevent render from hardening on the surface. Tempered stainless steel resists corrosion, but careful drying extends its lifespan. Always store the blade in its supplied reusable clip-on guard to avoid impact damage and preserve the sharp edges of the progressive rounded tips.
Bi-Flex technology combines a flexible 0.3 mm stainless steel blade with a PVC counter-blade that stiffens the assembly whilst maintaining controlled flexibility. This patented system guarantees uniform contact along the entire length, even on large widths, where a standard blade would tend to flex unevenly and create irregularities.
Yes, the ParfaitLiss blade is designed for smoothing sprayed render and polished concrete. Its flexibility and progressive rounded edges enable mark-free working on these demanding surfaces. The abrasion resistance of tempered stainless steel guarantees longevity even on abrasive materials such as concrete.