STORCH WALLPAPER ROLLER 4.5CM 217800
Storch wallpaper roller 4.5 cm for smoothing wallpaper lengths without air bubbles or creases. Ergonomic handle and easy cleaning after use.
Flex 18 V cordless impact driver, compact and easy to handle. Its 2 speeds let you adjust the driving speed to the material and the task, for more precise work.
Estimated delivery: 3 à 5 jours
The Flex PD 2G 18-EC LD 55 TC is a compact 18 V cordless impact driver with 2 speeds. It is suited to renovation and fit-out jobs, where driving, drilling and fastening alternate. Its brushless EC motor and compact size make it an everyday tool, for professional tradespeople and demanding DIYers alike.
The brushless EC motor is paired with the Electronic Management System (EMS), which protects the machine and extends its service life. The tool also features a motor brake, a start lock and an LED light. It is supplied with two 5.0 Ah Li-Ion batteries, a charger, a chuck and a belt clip.
Before driving screws, choose the appropriate speed. 1st gear, which is slower, gives the control needed for large-diameter screws or delicate fixings. 2nd gear is suited to everyday drilling and fast serial driving.
Set the torque to one of the 24 levels according to the material and the screw length, rather than relying on your finger on the trigger. A level that is too high damages screw heads and soft substrates. A level that is too low leaves the fixing insufficiently tightened: always do a test on an offcut or in an inconspicuous area.
For drilling, use drill bits in good condition that are suited to the material, and stay within the tool's capacities: 13 mm in steel, 52 mm in wood. Mark the starting point and keep the machine properly aligned. Remember to check the batteries' charge level before starting a long series of fixings.
| Poids | 1,2 kg sans batterie |
| Référence | 534914 |
| Couple maximal | 65 Nm (dur) / 35 Nm (doux) |
| Vitesse à vide | 0-500 / 0-1 800 tr/min |
| Perçage maximal | 52 mm bois / 13 mm acier |
| Niveaux de couple | 24 |
| Tension de batterie | 18 V (Li-Ion, système Flex 18 V) |
| Capacité du mandrin | 1,5 - 13 mm |
| Capacités de batterie | 2,5 / 5,0 / 8,0 Ah |
| Fréquence de frappe à vide | 0-8 000 / 0-28 800 coups/min |
On site, the most common pitfall is always working at the same speed and the same torque setting. Get into the habit of starting in 1st gear with a moderate torque level, then increasing gradually until you reach the desired tightness. This prevents marking the substrates and stripping the threads in soft materials, and keeps a clean finish on visible elements.
With two batteries supplied, keep one charging while the other is in use. Store the tool with the battery removed and the start lock engaged in the case or carrying bag: this prevents accidental start-up. 2.5, 5.0 and 8.0 Ah batteries are available for this machine: a lower capacity makes the whole tool lighter for work at height, while a higher capacity increases runtime.
Oui, la machine est livrée avec deux batteries Li-Ion 5,0 Ah et un chargeur. Le mandrin et un clip de ceinture font aussi partie de la livraison.
Flex indique des batteries 18 V de 2,5, 5,0 et 8,0 Ah pour ce modèle. Une batterie de petite capacité est plus légère, une batterie de grande capacité offre plus d'autonomie.
Les capacités maximales annoncées sont de 52 mm dans le bois et de 13 mm dans l'acier. Le mandrin à serrage rapide accepte des outils de 1,5 à 13 mm.
Le couple maximal atteint 65 Nm en vissage dur et 35 Nm en vissage doux. Le réglage comporte 24 niveaux, ce qui permet d'adapter la force de serrage au matériau et à la vis.
Elle pèse 1,2 kg sans batterie et mesure 164,5 x 69 x 208 mm. Son format compact aide pour les travaux prolongés ou dans les endroits difficiles d'accès. Le poids final dépend de la batterie choisie.