REDLIGHT-TOUPRET
Lightweight Toupret filler for patching and smoothing on plaster, concrete, wood. Paintable after 30 min, no thickness limit, no setting time.
Flex 20 L site vacuum cleaner, class L, designed to pick up sanding and drilling dust. Manual filter cleaning and non-woven bags included for clean, tidy work.
Estimated delivery: 3 à 5 jours
The Flex VC 21 L MC is a class L safety vacuum cleaner, designed to keep a job site clean during and after painting, sanding or renovation work. It is supplied with non-woven vacuum bags, which make dust disposal easier. Its 20 l tank and manually cleaned filter make it a compact tool that is easy to move from one room to another.
Place the vacuum cleaner as close as possible to the work area, but out of the way of foot traffic, so that the 3.5 m hose and the 5 m cable stay clear. Check that the non-woven bag is properly fitted before each use, so that the filter is protected from the very first minutes of vacuuming.
This appliance has no suction power control: adapt your nozzle and your technique to the surface. For delicate surfaces, use a suitable nozzle and make steady passes rather than pressing down.
After the job, empty the tank and replace the full bag without shaking it. Then clean the filter by hand, so that suction stays consistent the next time you use it.
| Poids | 7,4 kg |
| Débit volumique | 3600 l/min |
| Dépression max. | 21 000 Pa |
| Surface du filtre | 3000 cm² (nettoyage manuel) |
| Volume de la cuve | 20 l (liquide : 11 l) |
| Dimensions (LxlxH) | 430 x 380 x 506 mm |
| Puissance absorbée | 1000 W |
| Tension / fréquence | 230 V – 50/60 Hz |
| Longueur tuyau / câble | 3,5 m / 5,0 m |
On this model, the filter is cleaned by hand: a loss of power during a job therefore most often comes from a clogged filter or an overfilled bag, not from a worn-out motor. Change the bag before it is completely full and clean the filter as soon as suction weakens: you will avoid clogging it and wasting time.
As there is no suction power adjustment, the accessory is what makes the difference. Keep nozzles suited to floors and delicate finishes close at hand, and reserve the more aggressive ones for areas with rubble or sanding dust.
La cuve a un volume de 20 l. Pour les liquides, la quantité de remplissage indiquée par Flex est de 11 l.
Non, ce modèle n'a pas de régulation de la force d'aspiration. Il fonctionne avec un seul moteur d'aspiration, et la dépression maximale atteint 21 000 Pa.
Le tuyau mesure 3,5 m et le câble d'alimentation 5,0 m. Ces longueurs permettent de couvrir une pièce sans multiplier les déplacements de l'appareil.
Le nettoyage du filtre est manuel, comme l'indique le nom du modèle. Il se fait en dehors des phases d'aspiration, après avoir vidé la cuve. Le filtre offre une surface de 3000 cm².
Oui, ils facilitent l'évacuation des poussières et aident à garder la cuve propre. Pensez à les changer avant qu'ils soient pleins, pour garder une bonne aspiration.