SPS
SPS FACADE SATIN BLANC
Satin acrylic paint for facades and interior walls, including damp rooms. It withstands weather and abrasion for a durable, high-coverage finish.
21,45 €
24-48hMy cart
Your cart is empty.
SPS
WALL-PRIMER PLUS A TEINTER
Water-based acrylic primer for interior walls: it evens out the substrate, reduces its absorbency and optimises the topcoat, especially in white and light shades. Low odour, quick drying.
In stock
69,10 €incl. VAT
SizeChoose your format
Packaging
Your colour
Add to cart
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
3× ou 4× sans fraisdès 17,28 €/mois
Estimated delivery: 24-48h
Free shippingFrom €69 ex. VAT in BE · 24-48h
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
WALL-PRIMER PLUS A TEINTER
SPS Wall-Primer Plus is a water-based acrylic primer designed to prepare walls before the finishing coat. Highly opaque, it creates an even base, which is particularly useful when aiming for white or a light shade. It also limits the absorbency of the substrate, allowing the topcoat to look its best.
Technical characteristics
- Type: water-based acrylic primer, solvent-free.
- Extra hiding power: the resulting base is very even, with optimal coverage for whites and light colours.
- Substrate absorbency: reduced, which improves the effectiveness of the topcoat.
- Appearance: prevents shine.
- Coverage: 12 m² per litre.
- Recoatable after: 6 hours.
- Job-site comfort: low odour and quick drying.
- Pack sizes: 4 L and 10 L.
Application tips
Before applying the primer, make sure the substrate is sound, clean and dry. Dust thoroughly, repair cracks and defects, then let the filled areas dry. The primer evens out absorption between the repaired areas and the rest of the wall, but it does not replace proper preparation.
Apply an even, cross-hatched coat without overloading, to obtain a uniform film. Observe the 6-hour drying time before painting. In general, a single topcoat is then sufficient.
The product should be used in a well-ventilated area. Consult the safety data sheet before use and close the tin tightly after use.
Technical specifications
| Type | Apprêt acrylique à base d'eau |
| Finition | Empêche la brillance |
| Solvants | Sans solvant |
| Rendement | 12 m²/L |
| Teintes visées | Blanc et couleurs claires |
| Conditionnements | 4 L, 10 L |
| Recouvrable après | 6 h |
Pro tips
On a wall with a lot of repairs (plaster, filler, old stains), treat the entire surface with the primer, not just the touched-up areas. If you only prime the repairs, the finish may look different from one area to another, with visible variations in sheen under raking light.
Observe the 6-hour drying time even if the film feels dry to the touch. If you are planning a light finish, stick to a single topcoat: the primer is there precisely to make that possible. If the final result matters, do a test on a small area before starting the job.
FAQ
Combien de temps faut-il attendre avant de peindre par-dessus ?
Le Wall-Primer Plus peut être recouvert après 6 heures. Respectez ce délai avant d'appliquer la finition pour obtenir un résultat homogène.
Combien de couches de finition faut-il après l'apprêt ?
Grâce au pouvoir couvrant supplémentaire de l'apprêt, une seule couche de finition suffit en général. Cela dépend toutefois de l'état du support et de la teinte choisie.
Quelle surface couvre un pot de 4 L ou de 10 L ?
Avec un rendement de 12 m² par litre, un pot de 4 L couvre environ 48 m² et un pot de 10 L environ 120 m², pour une couche. Le rendement réel varie selon la porosité du support.
Cet apprêt convient-il pour une finition blanche ou claire ?
Oui, il est conçu pour offrir une couverture optimale sous les blancs et les couleurs claires, grâce à une base très uniforme.
L'apprêt sent-il fort ? Contient-il des solvants ?
Non : c'est un apprêt à base d'eau, sans solvant et à faible odeur. Travaillez malgré tout dans un endroit bien ventilé, comme l'indique la fiche de sécurité.
