ZINSSER® PEEL STOP
Transparent primer that penetrates and bonds old paint edges, fixes chalky surfaces and bridges cracks. Recoatable in 2 hours, prevents future peeling.
Test the shade at home before painting: this 0.35L Flügger sample can be applied directly to your wall to check the true colour result.
Estimated delivery: 48H
Before starting a painting project, it's best to confirm your colour choice under real conditions. The Flügger colour sample lets you test a shade directly on the surface, in the room's own light, before buying the full-size tin. A simple step that avoids unpleasant surprises and regrettable purchases.
Apply the sample to a clean, dry surface, lightly sanded if necessary, avoiding overly absorbent or uneven areas that could distort the colour result. A neutral piece of cardboard or board can also be used as a test surface, provided you move it around different areas of the room to judge the effect under various lighting conditions.
Use a small brush or foam roller for even application over an area of at least 30 x 30 cm, to get a realistic view of the colour once dry. Let it dry completely before judging the final result, as the shade may change slightly as it dries.
Don't hesitate to test several samples side by side if you're torn between different shades: a direct comparison is often more telling than a colour chart alone.
| Label | Ecolabel européen |
| Usage | Test de couleur avant achat |
| Marque | Flügger |
| Conditionnement | 0,35L |
A pro reflex: never judge a colour on a single isolated section of wall. Natural and artificial light dramatically changes how a shade appears depending on the room's orientation and the time of day. Always test the sample on at least two different walls, ideally one facing north and another brighter one, and observe it in the morning, at midday and in the evening before making your final choice.
Another lesser-known tip: apply the sample in two thin coats rather than one thick coat. The final colour result of a paint often depends on the number of coats applied, and a single-coat test may look paler or less opaque than the finished result.
Le format 0,35L permet de couvrir une surface de test confortable, largement suffisante pour appliquer deux couches sur une zone d'environ 1 à 2 m². C'est amplement de quoi juger le rendu d'une couleur avant de commander le pot en grand format.
L'échantillon peut s'appliquer directement sur le mur à peindre, à condition que celui-ci soit propre et sec, ou sur un support neutre comme un carton blanc. Tester directement sur le mur final reste la meilleure option pour juger l'effet réel de la lumière ambiante.
Oui, il s'agit de la même formulation que la peinture vendue en pot standard, uniquement conditionnée en plus petit volume. Le rendu de couleur sera donc identique une fois séché, à condition d'appliquer le même nombre de couches.
Le label Ecolabel garantit un produit répondant à des critères environnementaux stricts, un point important si vous êtes attentif à l'impact écologique de vos travaux de peinture. Cela permet aussi de tester la couleur en toute confiance avant l'achat du produit final.
Transparent primer that penetrates and bonds old paint edges, fixes chalky surfaces and bridges cracks. Recoatable in 2 hours, prevents future peeling.
Blocks stains, nicotine and tannins on wood and walls. Applicable from 5°C, recoatable in 2 hours : guaranteed time saving on site.
Matt 2-in-1 paint for interior walls and ceilings: primer and finish in one coat. Enhanced adhesion, wet-on-wet application without brush marks.
Anti-mould acrylic paint for bathroom and kitchen walls. Primer and finish in one product, wash class 1, quick drying.