Sofec
Expert'Liss in 25 kg Bucket
Ready-to-use filler plaster for walls and ceilings, suitable for manual or airless application. Optimal slip and long working time for flawless results with minimal effort.
32,06 €
24-48hMy cart
Your cart is empty.
AdforsRef. Adfors Plastergrid S70 - 70 g/m2 - 50 m x 100 cm (50m2)-1
Adfors Plastergrid S70 - 70 g/m² - 50 m x 100 cm (50m²)
70 g/m² reinforcement mesh for thick plasters: prevents cracks on board joints, expansion joints and fragile substrates. 50 m² in 100 cm roll.
In stock
109,15 €incl. VAT2,18 €/m² incl. VAT
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
3× ou 4× sans fraisdès 27,29 €/mois
Estimated delivery: 24-48h
Technical sheetDownload PDFFree shippingFrom €149 ex. VAT in BE · 24-48h
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
Adfors Plastergrid S70 - 70 g/m2 - 50 m x 100 cm (50m2)
The Adfors Plastergrid S70 reinforcement mesh is a fibreglass reinforcement designed to strengthen thick plasters and finishing renders. With its 70 g/m² weight and high mesh rigidity, it ensures crease-free installation and direct load transmission, ideal for preventing cracks on new or renovation substrates.
Technical specifications
- Weight: 70 g/m²
- Dimensions: 50 m x 100 cm roll (50 m²)
- Material: high-strength fibreglass
- High mesh rigidity for wrinkle-free installation
- Excellent tensile strength in both directions
- Compatible with all types of plasters and finishing renders
- Optimal thermal and chemical stability
Application advice
Prepare the substrate by removing all traces of dust, grease or loose material. The surface must be dry and sound before installation. Apply a first coat of plaster approximately 2 to 3 mm thick to the area to be treated.
Unroll the Plastergrid S70 mesh, pressing it firmly into the fresh plaster using a float or trowel. Ensure a minimum overlap of 10 cm between strips. The mesh rigidity facilitates installation and prevents creases that could show through the finish.
Immediately apply a second coat of plaster to fully embed the mesh. The recommended total thickness is approximately 4 to 5 mm. Allow to dry according to the plaster manufacturer's recommendations before finishing. Use a stainless steel float or trowel suitable for thick plasters for optimal results.
Technical specifications
| Grammage | 70 g/m² |
| Material | Fibreglass |
| Coverage area | 50 m² |
| Roll dimensions | 50 m x 100 cm |
| Recommended overlap | 10 cm minimum |
| Compatible plaster type | Thick plasters, finish renders |
Pro tips
The classic mistake is installing the mesh on plaster that's already smoothed or too dry: it won't adhere properly and may peel off. Always work in sections of 2 to 3 m² maximum, applying the base plaster just before unrolling the mesh. The rigidity of Plastergrid S70 is an advantage: unlike flexible meshes, it tensions itself and doesn't require constant holding during installation.
For internal and external corners, cut the mesh with scissors forming a V or fold it according to the angle, then carefully smooth down. On large surfaces, plan your overlaps: insufficient overlap creates a weak line where cracks will reappear. Finally, check that your plaster is compatible with fibreglass reinforcement, as some lightweight plasters don't provide sufficient adhesion.
FAQ
Is Plastergrid S70 mesh suitable for renovation on old cracked render?
Yes, this is precisely one of its primary applications. The 70 g/m² mesh provides maximum reinforcement to treat existing cracks and prevent their recurrence. However, ensure that the old substrate is sound, dust-free and that large cracks are filled beforehand.
Can this mesh be used with a fine finishing plaster?
No, Plastergrid S70 is designed for thick plasters and finish renders. For fine finishing plaster, choose a lighter mesh such as Plastergrid R52 or R70, specifically adapted for thin coats.
Does the mesh need to be dampened before application?
No, the fibreglass mesh is applied directly into fresh plaster, without prior dampening. Wetting is unnecessary and could even complicate handling by making the mesh slippery.
How many square metres can I cover with one roll?
One roll covers 50 m² gross. Taking into account overlaps of 10 cm between strips, plan for a usable area of approximately 45 m² for proper installation.
Can the mesh be applied to new plasterboard?
Yes, it is fully compatible with plasterboard, particularly on joints and corners to reinforce sensitive areas. First apply a coat of plaster suitable for plasterboard before embedding the mesh.
