Mirka® DEOS II 383CV 70 x 198 mm Rectangular Sander excl. 3.0 mm with Storage Case
Rectangular orbital sander 70x198mm for body filler and primers. Brushless motor 20% more powerful, ultra-compact (10cm) and quiet for longer working without fatigue.
Flex cordless set: 18 V random orbital sander with variable speed and compact 9 l class L vacuum cleaner, battery and charger included, for sanding with less dust.
Estimated delivery: 3 à 5 jours
Sand partition walls, woodwork or filler without trailing a cable or leaving dust all over the site: this set combines a FLEX 18 V random orbital sander with a compact 9.5 l vacuum cleaner. The set is designed for interior finishing work, where keeping the workspace clean matters as much as the quality of the sanding.
Before sanding, protect the floor and the door and window frames, then place the vacuum cleaner within reach of the 1.5 m hose. Connect the sander to the vacuum cleaner and activate the radio remote control: the vacuum starts together with the tool, and dust is captured as soon as it forms rather than swept up afterwards.
Work in even passes, without pressing too hard on the machine. The 5 mm orbit is suited to stock-removal sanding as well as preparation sanding before painting. Adjust the rotation speed to the surface: lower on delicate surfaces or softwoods, higher for roughing down a filler or an old finish.
Once sanding is finished, use the vacuum cleaner to remove dust from corners, skirting boards and ledges before applying your primer or topcoat. The liquid mode can also be used to deal with a small leak or splashes at the end of the job.
| Cuve | 9,5 l (liquides : 7,6 l) |
| Tension | 18 V |
| Flexible | 1,5 m |
| Débit d'air | 1780 l/min |
| Dépression max. | 20 400 Pa |
| Classe de poussière | L |
| Course de la ponceuse | 5 mm |
| Poids de l'aspirateur | 4,7 kg (sans batterie) |
| Plateau de la ponceuse | 150 mm |
| Dimensions de l'aspirateur | 440 x 340 x 258 mm |
On this model the filter is cleaned by hand: if suction weakens during sanding, it is almost always because the filter is clogged, not because the battery is flat. Get into the habit of cleaning it each time you change surface, especially after filler or putty, whose very fine dust clogs it quickly.
Keep in mind that class L is intended for low-risk dust. On a renovation site with old paints that may contain lead, or with hazardous dust, do not rely on this set alone: use a higher-class extraction system and comply with the regulations in force.
Le set comprend l'aspirateur sur batterie VC 9 L MC 18 RC (réf. 534916), le Power set 18-55 CA2 (réf. 535895) et la ponceuse excentrique ORE 5-150 18-EC sur batterie (réf. 534186).
Oui, il aspire les poussières comme les liquides. La capacité liquide est de 7,6 l pour une cuve de 9,5 l.
Elle permet de déclencher l'aspiration en même temps que votre outil. Vous n'avez donc pas à vous baisser pour allumer l'aspirateur à chaque reprise du ponçage.
L'aspirateur fonctionne avec les batteries FLEX 18 V, en 2,5, 5,0 ou 8,0 Ah. Une capacité plus élevée allonge l'autonomie, mais alourdit la machine.
Non, le nettoyage du filtre est manuel. Un entretien régulier aide à conserver une bonne puissance d'aspiration.